158
Daman Products Company, Inc. •
1811 North Home Street • Mishawaka, IN 46545-7267
Tel: 800.959.7841 574.259.7841 •
Fax: 800.241.7664 • Email: sales@daman.com • www.daman.com
0.25-19 BSPP
ISO 1179; BS 2779
M10 x 1.0
ISO 6149
0.25-19 BSPT
ISO 7; BS 21
4B
4M
4T
D03 Tapping Plates
Valve Pattern
ISO 4401-03-02
NFPA T3.5.1-D03
See Tech Infomation
D03
Circuit
P and T ports pro-
vided
A and B ports pro-
vided
L port provided
PT
AB
L
0.25-18 NPTF
ANSI B1.20.3
-4 SAE
ISO 11926; SAE 1926
4P
4S
B
A
0.88
0.88
0.47
1.75
1.16
2.25
[44.5]
[11.9]
[29.5]
[57.2]
[22.2]
[22.2]
TAPB
BPAT
'A'
port port
'B'
℄
℄
*
*
1.00 or 1.50
part thickness
L
0.62
0.47
1.75
1.16
2.88
[44.5]
[11.9]
[29.5]
[73.2]
[15.9]
TAP
LPAT
port
'L'
B
B
*
*
1.00 or 1.50
part thickness
℄
L
A and B Port Tapping Plate
Tapping Plate hardware / interface seal kit
is supplied. See page 179 for itemized list.
L Port Tapping Plate
Tapping Plate hardware / interface seal kit
is supplied. See page 179 for itemized list.
P
T
1.19
0.53
0.47
1.75
1.84
3.56
[44.5]
[11.9]
[46.7]
[90.4]
[13.5]
[30.2]
TAPB
BPAT
'T'
port port
'P'
*
*
1.00 or 1.50
part thickness
℄
*
℄
P and T Port Tapping Plate
Tapping Plate hardware / interface seal kit
is supplied. See page 179 for itemized list.
Specifications, descriptions, and dimensional data are subject to
correction or change without notice or incurring obligation.
Download latest catalog page revisions at www.daman.com.
Product Type
Tapping Plate
TP
Port Threads
Ordering Information
Material Valve Pattern Product Type Circuit Port Threads
Material
D
†
Working pressure should
be considered in accordance
with ISO 4413 to determine
appropriate material type.
Ductile Iron - D4512
5000
†
psi 34.5 MPa
Aluminum - 6061-T6
3000
†
psi 20.7 MPa
A
For coating options
see pages 245-246.
Thickness
Thickness
For 1.5" thickness
150
OMIT for standard 1"
thickness
For larger ports, see next
page (p. 158.1).
158.1
Daman Products Company, Inc. •
1811 North Home Street • Mishawaka, IN 46545-7267
Tel: 800.959.7841 574.259.7841 •
Fax: 800.241.7664 • Email: sales@daman.com • www.daman.com
D03 Tapping Plates - Large Ports
Ordering Information
For coating options
see pages 245-246.
Valve Pattern
ISO 4401-03-02
NFPA T3.5.1-D03
See Tech Infomation
D03
Circuit
P and T ports pro-
vided
A and B ports pro-
vided
PT
AB
Product Type
Tapping Plate
TP
Material Valve Pattern Product Type Circuit Port Threads
Material
D
†
Working pressure should
be considered in accordance
with ISO 4413 to determine
appropriate material type.
Ductile Iron - D4512
5000
†
psi 34.5 MPa
Aluminum - 6061-T6
3000
†
psi 20.7 MPa
A
0.38-19 BSPT
ISO 7; BS 21
6T
0.38-19 BSPP
ISO 1179;
BS 2779
M14 x 1.5
ISO 6149
6B
6M
0.38-18 NPTF
ANSI B1.20.3
-6 SAE
ISO 11926;
SAE 1926
-8 SAE
ISO 11926;
SAE 1926
-12 SAE
ISO 11926;
SAE 1926
6P
0.50-14 BSPT
ISO 7; BS 21
8T
0.50-14 BSPP
ISO 1179;
BS 2779
M18 x 1.5
ISO 6149
8B
8M
0.50-14 NPTF
ANSI B1.20.3
8P
0.75-14 BSPT
ISO 7; BS 21
12T
0.75-14 BSPP
ISO 1179;
BS 2779
M27 x 2.0
ISO 6149
12B
12M
0.75-14 NPTF
ANSI B1.20.3
12P
6S 8S 12S
Port Threads
P
T
0.47
1.75
C
B
[44.5]
[11.9]
E
D
TAPB
BPAT
'T'
port port
'P'
A
℄
℄
P and T Port Tapping Plate
Tapping Plate hardware / interface seal kit
is supplied. See page 179 for itemized list.
TAPB
BPAT
'A'
port port
'B'
B
A
0.47
1.75
C
B
[44.5]
[11.9]
E
D
A
℄
℄
A and B Port Tapping Plate
Tapping Plate hardware / interface seal kit
is supplied. See page 179 for itemized list.
4.25
[108.0]
B
2.00
[50.8]
A
*D03TPAB6*
*D03TPPT8*
*D03TPPT6*
Dimension
0.88
[22.4]
1.81
[46.0]
0.88
[22.4]
DC E
*D03TPPT12*
*D03TPAB12*
*D03TPAB8*
4.25
[108.0]
2.50
[63.5]
4.75
[120.7]
3.00
[76.2]
0.88
[22.4]
1.81
[46.0]
0.88
[22.4]
2.06
[52.3]
0.88
[22.4]
0.88
[22.4]
For smaller ports, see
previous page (p. 158).
Daman Products Company, Inc. • 1811 North Home Street • Mishawaka, IN 46545-7267
Tel: 800.959.7841 574.259.7841 •
Fax: 800.241.7664 • Email: sales@daman.com • www.daman.com
159
D03 Tapping Plates
Valve Pattern
ISO 4401-03-02
NFPA T3.5.1-D03
See Tech Infomation
D03
Circuit
Spot drilled ports
Orifice plate
B to T vent plate
SD
OP
BTV
0.75
0.44
1.69
1.03
2.00
[42.9]
[11.2]
[19.1]
[26.2]
[50.8]
TAPB
BPAT
0.062 NPTF- (4) PLCS
0.062 NPTF
Orifice Tapping Plate
Tapping Plate hardware / interface seal kit
is supplied. See page 179 for itemized list.
1.00
0.47
1.75
1.84
3.56
[44.5]
[11.9]
[25.4]
[46.7]
[90.4]
TAPB
BPAT
0.75
0.44
1.69
1.03
2.00
[42.9]
[11.2]
[19.1]
[26.2]
[50.8]
TAPB
BPAT
Spot Drilled Tapping Plate
Tapping Plate hardware / interface seal kit
is supplied. See page 179 for itemized list.
B to T vent Tapping Plate
Tapping Plate hardware / interface seal kit
is supplied. See page 179 for itemized list.
Specifications, descriptions, and dimensional data are subject to
correction or change without notice or incurring obligation.
Download latest catalog page revisions at www.daman.com.
Product Type
Tapping Plate
TP
Ordering Information
Material Valve Pattern Product Type Circuit
Material
D
†
Working pressure should
be considered in accordance
with ISO 4413 to determine
appropriate material type.
Ductile Iron - D4512
5000
†
psi 34.5 MPa
Aluminum - 6061-T6
3000
†
psi 20.7 MPa
A
For coating options
see pages 245-246.
Daman Products Company, Inc. • 1811 North Home Street • Mishawaka, IN 46545-7267
Tel: 800.959.7841 574.259.7841 •
Fax: 800.241.7664 • Email: sales@daman.com • www.daman.com
160
D03 Tapping Plates
Valve Pattern
ISO 4401-03-02
NFPA T3.5.1-D03
See Tech Infomation
D03
No. of Stations
02 Stations
02
Valve Spacing
L*D03TP022AB =
2.00 inch (50.8 mm)
*D03TP022AB =
2.13 inch (54.0 mm)
4.00 inch (101.6 mm)
Not available with L.
2
4
Circuit
A1 common to A2
B1 common to B2
AB
2.00
[50.8]
1.03
[26.2]
0.45
[11.4]
"B" (See chart)
"A" (See chart)
1.25
[31.8]
BPTA T APB
BTAP
BPAT
valve
manifold
D03 Two Station Tapping Plate
A
1
common to A
2
, B
1
common to B
2
Tapping Plate hardware / interface seal kit
is supplied. See page 179 for itemized list.
Specifications, descriptions, and dimensional data are subject to
correction or change without notice or incurring obligation.
Download latest catalog page revisions at www.daman.com.
Product Type
Tapping Plate
TP
Product Line
For use with standard
design D03 manifold.
Omit
For use with FlexMount
D03 manifold.
Spacing code 2 only.
L
4.45
[113.1]
2.58
[65.5]
B
5.75
[146.1]
3.88
[98.6]
A
*D03TP024AB
2.45
[62.3]
3.75
[95.3]
L*D03TP022AB
*D03TP022AB
Dimension
There are two different tapping plate models with spacing code 2 available. This is
necessary to cover the variation of valve spacing between the standard design and the
FlexMount design of D03 manifolds. The standard manifold design has 2.125” valve
spacing while the FlexMount design has 2.000” valve spacing. An L is added to the
front of the model number to denote the tapping plate designed to be used with the
FlexMount manifold. Note that a single model is required with spacing code 4 as both
the standard and FlexMount designs have 4.000 spacing.
Ordering Information
Product Line Material Valve Pattern Product Type No. of Stations Valve Spacing Circuit
Material
D
†
Working pressure should
be considered in accordance
with ISO 4413 to determine
appropriate material type.
Ductile Iron - D4512
5000
†
psi 34.5 MPa
Aluminum - 6061-T6
3000
†
psi 20.7 MPa
A
For coating options
see pages 245-246.
246
Daman Products Company, Inc. •
1811 North Home Street • Mishawaka, IN 46545-7267
Tel: 800.959.7841 574.259.7841 •
Fax: 800.241.7664 • Email: sales@daman.com • www.daman.com
Coatings Available For Daman Standard
Product Lines
Anodizing options available for all catalogued aluminum parts:
"-BA" added to the end of the part number for black anodize.
"-CA" added to the end of the part number for clear anodize.
Electroless nickel option available for all catalogued ductile parts:
"-EN" added to the end of the part number for electroless nickel.
"-BA" Coating: 6061-T6 Aluminum with Black Anodize
Process used conforms to MIL-A-8625F Type II, Class 2
• Dyed black.
• Nickel acetate sealed.
• Anodic thickness varies from approximately 0.0002 - 0.0008 based on machined features.
• Sample salt spray testing had acceptable performance at 96 hrs.
• One or more mounting holes may be unanodized due to racking requirements.
"-CA" Coating: 6061-T6 Aluminum with Clear Anodize
Process used conforms to MIL-A-8625F Type II, Class 1
• No added color; appearance is of matte aluminum.
• Nickel acetate sealed.
• Anodic thickness varies from approximately 0.0002 - 0.0008 based on machined features.
• Sample salt spray testing had acceptable performance at 96 hrs.
• One or more mounting holes may be unanodized due to racking requirements.
"-EN" Coating: D-65-45-12 Ductile Iron with Electroless Nickel Coating
Process used conforms to MIL C26074, AMS 2404, ASTM B 733
• NOTE: Thickness supplied is less than A, B or C denition, therefore no dened salt spray
hour rating (Coating thickness is 0.0002 - 0.0004 inch).
• Chemically applied completely uniform deposit thickness.
• High Phosphorus - 10-13 weight %.
• Uniform thickness; excellent hardness; resistant to scratches, strikes and chemicals.
• Meets or exceeds adhesion testing in ASTM B571.
Performance of surface treatments varies by application and environment. No specic corrosion resistance is warrantied.